WECO PP-1025 Custom Blend 2 ½ " x 10" Polyphosphate Water Filter Cartridge for Corrosion Control

<ul><li>Utilizes Patented Outside/In Enpress Polymeric Membrane Filtration Module that is NSF 61, EPA, ACS and CDHS certified. BioVir certified and tested module for log reduction of Bacteria and Virus.</li><li>Four bundles of 0.02 micron filtration membranes in each vessel in a twin alternating configuration.</li><li>Reach out to us for silica reduction solutions. Pilot testing required. Our system effectively removes suspended silica particles larger than 0.02 microns. Smaller silica in solution may pass through the membrane.</li><li>High performance flow rates, up to 10 gpm.</li><li>Standard 1" MNPT ports with 1/2" MNPT drain.</li><li>Standard bottom drain flush valve removes any filter particles that have accumulated at the bottom of the UF.</li><li>Low waste water discharge used when cleaning. Treated water backwash increases membrane life.</li><li>Designed for cyst reduction, turbidity, and fine sediment filtration applications.</li><li>Influent water must meet these requirements. Please contact WECO for pre-treating water. Pilot testing with UF-PLT-STK advised. <br>Influent Parameters: Pre-Filtration &lt;5 Microns, 1 PPM Chlorine,0.3 PPM Iron, 0.05 PPM Manganese, Plus Others See Pre-treatment Section Below.</li></ul>

• Four bundles of 0.02 micron filtration membranes in each vessel in a twin alternating configuration.